disciplerocks's B2 build thread

[RangerSVT]

No it doesn't, and I have a spare clutch master and line I could experiment with...
SVT

 

[disciplerocks]

Let me know how it goes.

 

[RangerSVT]

I'll need to grab an E-brake handle from a mustang or similar...If you want to grab a couple from the JY I'll be glad to set em up and you bolt it up :icon_thumby:
SVT

 

[RangerSVT]

The only problem I see with that is you would need to have a check valve to install so you don't push the fluid to the brake master cylinder instead of the calipers...
SVT

 

[dangerranger83]

Okay so that works by hooking into your current brake lines. I have a spare clutch master outside too, now you have my gears a turning. My E-brake cable is zip tied to my frame and I have no clue how to get it hooked up, this looks like an easier solution.

 

[disciplerocks]

Well you can get one for about $125-$150 which isnt too bad.

 

[disciplerocks]

Oops......

 

[dangerranger83]

Thats actually not a bad price, may considering getting one if I can find a place to mount in in my truck, I use the middle seat in mine so cant get rid of it ATM until I find another vehicle, wish i wasnt broke, saw an 02 exploder at a dealership for $4000, it wouldnt see offraod use.

 

[disciplerocks]

Been busy out in the garage today. Cut front fenders, installed new rear shocks, ran axle breather lines, bypassed abs, bled rear brakes, redid door pins like slo-vo's, wired in half door speaker, hacked into the half door a bit, cut 1" off bottom of the hatch, and installed an interior spare carrier.

 

[disciplerocks]

Just took the first drive in it. Wow is it different. I like the gearing, but the welded rear and soft springs are gonna take some getting used to. Need to get dual shocks set up on the front.

 

[disciplerocks]

Damn I need some money
http://lexington.craigslist.org/pts/2362862051.html

 

[4.0B2]

i bet those would go great on that b2... start mowing yards or something! lol

 

[Kyle M.]

Buy the DIY kit, you can have em done for around 300 with hardware if you really wanted bead locks. Just need to borrow someones 220 welder to do them.

 

[disciplerocks]

Yeah but those come with 5 good spares.

 

[Kyle M.]

yeah, for 500 more bucks lol

 

[disciplerocks]

Lol good point

 

[CheapThrillB2]

I have a guy near me in one of my offroad clubs with 5 diy beadlock rims the DIY style that are 15x8 5x5.5 for $350. pick up some lug adapters cheap and rock that shit.

 

[Boggin]

dustin you buy them diy beadlocks cheapthrills mentioned, send me your current rims and ill send you my 5x4.5 to 5x5.5 lug adapters lol that sounds like a good deal to me

 

[disciplerocks]

I need other things before beadlocks. And I don't want to put adaptors/spacers on a D35 with 35s.

 

[disciplerocks]

Made it to the dirt mall today and picked up a couple things. Ammo box and a psi gauge I may use with the on board air.